80g Pillar Holographic Paper Acrylic Adhesive White Glassine

TYPICAL PERFORMANCE

DATA(N/25mm)

Loop Tack (st,st)-FTM 9: 16.0 or Tear

20 min 90° Peel (st,st)-FTM 2: 7.5or Tear

24 hour 90°Peel (st,st)-FTM 2: 9.0or Tear

Minimum Application Temperature:+10°C

After labeling 24H,Service TemperatureRange:-50°C~+90°C

ADHESIVE PERFORMANCE

The adhesive features excellent initial tackand ultimate bond on a wide variety ofsubstrates, including apolar, slightly roughand curved substrates.
AP104 is suitable for applications wherecompliance with FDA 175.105 is required.This section covers applications where forindirect or incidental contact food, cosmeticor drug products.

APPLICATIONS AND USE

This product is ideal for primary label withspecial pillar holographic appearance.

Due to the facestock is thicker than othernormal facstock, it does not apply for those bottles with small diameter. Not recommended for any types of compute rprinting. 
The above does not represent any guarantee or warranty and the Purchaser must independently determine the suitability of the productsfor the Purchaser'spurposes

PRINTING/CONVERTING

Material has a print friendly coating in orderto give good ink anchorage with offsetprinting.
Ink testing is always recommended beforeproduction.We recommend to overaminate the label

SHELF LIFE
One year when stored at 23+2'℃ at 50+5%RH.