AW2101 Oil Barrel Mark

Facestock

A mirror finish cast coated paper for high quality printing, especially for solid printing.

Basis Weight: 80 g/m2± 10% ISO536

Caliper: 0.084 mm ± 12% ISO534

Adhesive

A general purpose permanent, acrylic based adhesive.

Liner

A super calendared white glassine paper with excellent roll label converting properties.

Basis Weight: 60 g/m2 ± 10% ISO536

Caliper: 0.052mm ± 10% ISO534

Performance data loop Tack (st,st)-FTM 9: 16.5 or Tear (N/25mm)

20 min 90° Peel (st,st)-FTM 2: 8.5 or Tear 24 hour

90° Peel (st,st)-FTM 2: 10.0 or Tear

Minimum Application Temperature: 10°C After labeling 24Hours, Service Temperature Range: -50°C~+90°C

Adhesive Performance

The adhesive features excellent initial tack and ultimate bond on a wide variety of substrates, including apolar, slightly rough and curved substrates. Particularly good performance at small cylindrical or over laminated labels: e.g. cosmetic and pharmaceutical containers.

Applications and use

This material is suitable for using on a wide range of rough substrates. The above does not represent any guarantee or warranty and the Purchaser must independently determine the suitability of the products for the Purchaser's purposes.

Conversion/printing

This glossy, coated facestock is specially suited to provide top printing quality in all usual processes, whether single or multicolour, line or process colour printing. Excellent printing result in solid area. Cares should be taken with the ink viscosity during printing process, too high viscosity of ink will damage the surface of paper. Need avoid too much re-winding tension to causing bleeding. Excellent conversion characteristics in rotary.

Shelf life

One year when stored at 23 ± 2°C at 50 ± 5% RH